Protect your driveway from the Florida heat
JACKSONVILLE, Fla. – Whether it's a two-ton car driving over it multiple times a day, the hot sun beating down, salt deteriorating the surface in the winter or water seeping into cracks causing the cement to freeze and crack, it's important to fight back and give your driveway some relief from that pain.
Regular maintenance on your driveway every two to three years can prevent staining and cracks, while significantly extending its life. A well-maintained driveway enhances your home's curb appeal and can increase its resale value.
Angie's List asked highly rated driveway contractors about the benefits of sealcoating your drive.
- Why sealcoat? Whether your driveway is concrete or asphalt, sealing it is an important part of keeping it looking like new for a long time. The sealant, which sits on top of the driveway, acts as a barrier that prevents water, ice, car fluids, the sun, salt and other chemicals from staining and eating away at the surface of the driveway.
- How much: Fixing minor problems like stains, as well as sealcoating the pavement can cost between $200 and $300. Most companies base their estimates on the square footage of your driveway. Some charge per square foot for an exact value, while others charge a flat rate per 1000 square feet with a minimum charge for smaller driveways. Replacing a section of the asphalt driveway, for example, can cost several hundred dollars more, but that is still far cheaper than spending thousands on a new driveway.
- How often? How often you seal your driveway will vary based on your location. If you live in a cold climate with harsh winters and numerous freeze-thaw cycles you'll have to seal every one to two years. Those in much milder climates can often go as little as every four years.
Angie's List Tips: Hiring a driveway contractor
- What kind of sealing chemical do you use? Different chemicals have different properties and effects. The shiniest water-resistant sealings may make the pavement dangerously slippery, especially if you live in an area where rain, ice and snow are common.
- Do you thin-out the sealer? Some driveway contractors thin-out their sealer to save money, but the result is less than desirable. Make sure they apply the sealer according to the manufacturer's instructions.
- How do you spread the sealer? The hands-on approach is the one you're looking for because it ensures even distribution. Alternatives can produce sealing puddles, which results in a driveway overly protected in some places and not at all in others.
- Will you repair existing cracks before applying the sealer? If the answer is yes, be sure to get a cost estimate for the entire job. It's important to fix cracks in your driveway before sealing it. If the cracks are minor, fix them yourself by clearing them of debris and broken edges and then filling them with a substance such as textured caulk, concrete sealer or pourable grout.
- When can you do the job? Temperature is key when sealing driveways. Usually, anything over 65 degrees Fahrenheit is good.
Copyright 2014 by News4Jax.com. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.